10 Misconceptions Your Boss Shares Regarding Double Glazing Door Lock Repairs
10 Misconceptions Your Boss Shares Regarding Double Glazing Door Lock Repairs
Blog Article
Double Glazing Door Lock Repairs
Have your uPVC window or door mechanism become faulty? Perhaps the handles on your uPVC windows and doors aren't aligned properly or are difficult to use.
It is crucial that the double glazed doors operate smoothly, otherwise you'll be wasting energy and increase the likelihood of burglary. Owen the Locksmith can repair your door lock at reasonable costs.
Snapped Key
If a key breaks inside a lock, it can be incredibly annoying. It's also potentially a security risk since the door may not lock and could leave you vulnerable to intruders. Fortunately, there are simple fixes you can try to resolve the problem and get your door operating properly again.
Be sure to remain calm. If you panic and start doing a lot of fumbling around, you might just end up pushing the damaged piece of the key further into the lock, which could make the situation worse.
Spray WD-40 or another penetrating lubricant, into the lock. This will assist the broken piece come out more easily. You can also use the screwdriver to break off any pieces that are stuck. If you're lucky enough to have a little bit of the key that is hanging out and you want to remove it, make use of a paperclip or other metal object with a thin surface to grab it and then pull it out. Both methods work, but be careful not to push the damaged key further into the keyway.
Some paperclips come with grooved edges that can be used as hook extractors. Jigsaw blades also work well for this. If you do not have any of these handy, you can use needle-nose pliers that bend to create a hook. Finally, you can use a pair of tweezers grab and pull out the last piece of broken keys.
If you are unable remove the broken piece of key then you can use a lock deicer. It's available in many hardware stores and works by freezing any moisture present in the lock.
If none of these solutions work, it may be time to consult a locksmith. The experts at Fitlocks can quickly solve problems with uPVC door locks and mechanisms, including snapped keys and broken handles. They can also reconfigure your double glazing door mechanisms to make them easier to operate. You can book repairs to your double-glazing online or contact us to discuss your requirements.
Broken Cylinder
A broken cylinder is a serious security threat. A professional locksmith is able to fix the cylinder. To fix the cylinder, locksmiths must tap it. They can do this with the hammer or any other tool, but the most efficient method is to use an extended match or piece of wire. Position the match or the wire's end close to the keyway. The locksmith will hit the lock to break it open. This is much better than using a hammer that can cause damage to the lock.
The most common cause of cracks in the head of a cylinder is due to overheating. This can happen when the cylinder block and cylinder head are made from different metals, like cast iron and aluminium. When various metals heat up and cool down at different rates, it could cause localised hotspots that expand faster than the rest of the cylinder head, leading to cracks.
Another possible cause of cracks in cylinders is corrosion. If the cylinder block and head are not maintained properly they could be corroded or rust and cause them to expand more than they would normally. In time, this could cause cracks.
If your uPVC window or door lock is brittle or requires a lot of pressure to turn, it can be the result of many things. A faulty locking mechanism, misalignment, or the wear of the handle are typical reasons for this issue.
This is a simple and inexpensive fix that most double glazing owners can do. A professional locksmith will usually be able solve this issue within a matter of hours of arriving at your property. They can fix the locking mechanisms, or change the window handles, and also change the gearboxes, depending on your particular requirements. A skilled locksmith will always be able to advise you on the most cost-effective solutions for your home. They can also suggest upgrades to 3 Star security TS007 euro cylinders that will add an extra layer of security against burglars. This is a small cost to pay for the peace of mind that comes from knowing your uPVC doors are secure.
Broken Handle
It's not surprising that window handle locks could break. They are equipped with complex mechanisms that become less effective over time. It isn't easy to determine the reason behind the problem and fix it correctly.
Fixing the broken handle, regardless of whether it's the internal latch or the locking mechanism can increase the security of your uPVC door and stop draughts. Incorrectly repairing or replacing your handle can be very costly and may damage the door's frame and lock It is therefore worth taking the time to do it correctly.
Screwdriver Open the window and the screw loose, loosen the handle. The screw should be on the inside face of the back plate, which is usually covered by an attractive cover for the screw for aesthetic reasons. Be careful not to lose any of the internal components within the handle, for example the plates or levers that are on the opposite side of the spindle. Ideally, keep these in the same order so you can re-install them in the event of a need.
Then, with an additional screwdriver take the screw off that holds the handle to the spindle in the back. Once the screw is free, you can pull the handle out and take the broken spindle out. Replace it with a new one, ensuring it's the same size as the old one (you will typically find them online or in hardware stores) and screw it securely into the right place. Do not tighten the screw too much as this could damage the handle and the window frame.
Ensure the new handle is correctly installed Close the window and test the handle. It should operate smoothly, and you will be able open your window after a few times.
While you're working on the handle, don't forget to more info make sure your uPVC windows are shut correctly. If they don't close properly, you may experience damp or draughts in your home. Also, you could be compromising the energy efficiency of your home. Core Sash Windows is a local window company that can adjust the hinges on the window frames to ensure that they shut properly.
Broken Spindle
It is more common for the spindle to break rather than the handle. This is most typical in uPVC tilt and turn windows. These windows require a handle more info that operates an locking device within the window frame. The handle is attached a central rod that triggers the locks that are shaped like mushrooms double glazed window near me and secure into the frame of the window keep. If the dead latch mechanism fails to open when the handle is turned, it's likely the spindle is damaged. This can be a frustrating problem.
There are solutions to this problem. A reputable locksmith will be able to quickly and effectively address this issue. A good locksmith can disassemble the handle of the window by using a tool to remove the wheel part in which the spindle is. This is done without damaging the handle or causing any other damage to the frame of the window.
Once the wheel is removed, the technician can inspect the spindle to determine what caused it to break. This involves breaking the spindle into its constituent components and carefully observing their general condition as well as any specific areas of wear or damage. The process is done in a clean room by skilled technicians.
The next step is to clean the damaged spindle. This will remove any dirt or debris that could be hindering its normal function. Following this the spindle can be repaired or replaced. If it's being replaced, the technician double glazed window suppliers near me will need an identical dowel size to the one used in the first and drill mating holes in both pieces of the spindle. This will ensure that the spindle is perfectly matched with the handle.
If click here the damaged spindle is beyond repair, it could be necessary to replace it completely. Home centers sell generic replacements but if the window design is unique you'll require contacting an expert in woodworking or cabinet making who can recreate the exact piece. After the spindle is installed, it is connected to the handle. The screw holes on the handle to the existing screws in the frame. Once the handle is firmly seated, you can operate your uPVC windows.